Conveyor Rollers 

  • Conveyor Rollers according to DIN 15207
  • Pipe S235 JRG2 according to EN10025 Part 2: 2004
  • Shaft S235 JR (cold draw) according to EN10025 Part 2: 2004
  • Bearings 62, 63.. DIN 625  internal  play  tolerance C3
  • Pipe diameter  Ø51 up to  Ø 219,1mm 
  • Shaft diameter  Ø10 up to  Ø 90mm
  • *Special sizes upon request

Impact Rollers 

  • Return Rollers according to DIN 15207
  • Pipe S235 JRG2 according to EN10025 Part 2: 2004
  • Shaft S235 JR (cold draw) according to EN10025 Part 2: 2004
  • Bearings 62, 63.. DIN 625  internal  play  tolerance C3
  • Pipe diameter  Ø51 up to  Ø 159mm Shaft  diameter  Ø10 up to  Ø 60mm
  • *Special sizes upon request

Return Rollers

  • Return Rollers according to DIN 15207
  • Pipe S235 JRG2 according to EN10025 Part 2: 2004
  • Shaft S235 JR (cold draw) according to EN10025 Part 2: 2004
  • Bearings 62, 63.. DIN 625  internal  play  tolerance C3
  • Pipe diameter  Ø51 up to  Ø 159mm Shaft  diameter  Ø10 up to  Ø 60mm
  • *Special sizes upon request

Heavy Duty Rollers

  • Heavy Duty Rollers (Girlants) according to DIN 15207
  • Pipe S235 JRG2 according to EN10025 Part 2: 2004 
  • Shaft S235 JR (cold draw) according to EN10025 Part 2: 2004
  • Bearings 62, 63.. DIN 625  internal  play  tolerance C3
  • Pipe diameter  Ø51 up to  Ø 159mm Shaft  diameter  Ø10 up to  Ø 60mm
  • *Special sizes upon request
 

Self Center Rollers

  • Pipe S235 JRG2 according to EN10025 Part 2: 2004,
  • Shaft S235 JR (cold draw) according to EN10025 Part 2: 2004
  • Bearings 62, 63.. DIN 625  internal  play  tolerance C3
  • Pipe diameter  Ø51 up to  Ø 108mm 
  • Shaft  diameter  Ø10 up to  Ø 30mm
  • *Special sizes upon request

Drive Pulleys

  • Thickness of steel pipe can be 6 – 25 mm
  • Pipe steel quality  S235 JRG2 according to
  • EN10025 Part 2: 2004, (depends on the needs)
  • Shaft steel quality C45  W.Nr 1.1191, C60 W.Nr 1.1221 &  42CrMo4 W.Nr  1.7225
  • Shaft tolerance at bearing point h9
  • Pulleys can be manufactured either welded or locked assembled, each case depends on the working conditions
  • *Special sizes upon request

Return Pulleys

  • Thickness of steel pipe can be 6 – 25 mm
  • Pipe steel quality  S235 JRG2 according to
  • EN10025 Part 2: 2004, (depends on the needs)
  • Shaft steel quality C45  W.Nr 1.1191, C60 W.Nr 1.1221 &  42CrMo4 W.Nr  1.7225
  • Shaft tolerance at bearing point h9
  • Pulleys can be manufactured either welded or locked assembled, each case depends on the working conditions
  • *Special sizes upon request

Tension Pulleys

  • Thickness of steel pipe can be 6 – 25 mm
  • Pipe steel quality  S235 JRG2 according to   EN10025 Part 2: 2004, (depends on the needs)
  • Shaft steel quality C45  W.Nr 1.1191, C60 W.Nr 1.1221 &  42CrMo4 W.Nr  1.7225
  • Shaft tolerance at bearing point h9
  • Pulleys can be manufactured either welded or locked assembled, each case depends on the working conditions
  • *Special sizes upon request

 

Idlers V-Type

  • Idlers consisted of 2 rollers, inclination: 10 to 30 degrees.
  • Steel quality:  S235 JR according to   EN10025 Part 2: 2004,  S275 JR according to   EN10025 Part 2: 2004
  • Rollers: any type, except return & heavy duty
  • *Special sizes upon request
 

 Idlers W-Type

  • Idlers consisted of 3 rollers, inclination: 10 to 30 degrees.
  • Steel quality:  S235 JR according to   EN10025 Part 2: 2004,  S275 JR according to   EN10025 Part 2: 2004
  • Rollers: any type, except return & heavy duty
  • *Special sizes upon request

Autocenter Idlers

  • Idlers consisted of 5 rollers, inclination: 10 to 30 degrees.
  • Steel quality:  S235 JR according to   EN10025 Part 2: 2004,  S275 JR according to   EN10025 Part 2: 2004
  • Rollers: any type, except return & heavy duty
  • *Special sizes upon request